There is something fun and curvy coming our way starting November 3. It’s the Quite Curvy Variety Bundle by Stampin’ Up!

I’ve created 2 quick and easy cards using both pieces of paper from one die cut. For the top card I used the portion of the die cut piece that had the hole in it. Then stamped some of the pine boughs in Shaded Spruce. The bow and words are stamped with Cherry Cobbler and the bow is colored with a Real Red Stampin’ Write Marker.

I’ve added some of the left over Classic Christmas Designer Series Paper to the edge of the inside.

The second card is all done in Cherry Cobbler. I did have to stamp the stars twice to get the curves to match up to the paper. I also added a small strip of a different design of the Classic Christmas paper to the bottom of the card.

Here is the inside of the second card, again with some scrap strips added.

Directions:

First die cut the 6″ x 6″ piece of Cherry Cobbler Classic Christmas DSP. I had the die at about 2 1/2″ from the bottom on one side and about 3 1/2″ on the other. The side with the hole was cut to 4″ wide. The piece without holes was cut to about 2 1/4″ on the thick side of the curve and ended up being about 1″ wide on the narrow end. All of these measurements are approximate just to give you an idea of the size.

I added some gold Metallic Pearls to the horizontal card and some of the Cherry Cobbler Christmas Rhinestones on the vertical card.